产品搜索: 高级搜索

北京宝佳亚龙光电科技有限公司
Beijing Bigelong Tech. Co., Ltd.

拉压试验机

当前位置:网站首页 > 产品中心 > 传感器 > 拉压试验机

产品品牌:NMB

产品型号:TGE

产品名称:拉压试验机

产品描述:

产品说明:

Specifications  
型号 TGE-250kN TGE-100kN TGE-50kN TGE-10kN TGE-5kN TGE-1kN TGE-500N TGE-200N
最大测试力 250 kN 100 kN 50 kN 10 kN 5 kN 1 kN 500 N 200 N
测量力 *1) 0.1 N ~ 250 kN 0.1 N ~ 100 kN 0.1 N ~ 50 kN 0.1 N ~ 10 kN 0.1 N ~ 5 kN 0.1 N ~ 1 kN 0.1 N ~ 500 N 0.1 N ~ 200 N
测试空间 Tension and Compression test can be available at the lower
section of movable crosshead.
(Upper tension type is available as an option. )
加载方式 Constant speed loading method with highly accurate AC servo motor and precise ball screw
允许试验力测试速度 Within the max. test force in all of the test speed ranges.
试验力范围 When the rated output of the load cell is at 3 mV/V :
Selected from once/AUTO or 100 times
When the rated capacity of the load cell is 20 N or less : Once
When the range is set to once/AUTO, the full scale of the display, the decimal point position and the display unit changes automatically.
测试力的测量精度 ±1 % of indicated value from 1/1 ~ 1/500 of load cell capacity = JIS 1 class (±0.5 % of indicated value = JIS0.5 class is an option.)
适用的标准 1 or 0.5 class of JIS B 7721, class 1 or 0.5 of ISO7500-1, Grade 1 or 0.5 of BS 1610, Class 1 of ASTM E4, DIN 5122
有效测验,宽度(mm) (*2) 600 600 420 420
交叉头冲击 *3) (mm) 1 550 1 350 1 015 1090
最大安装空间 (mm) 1 690 1 555 1 165 1 185
张力测试冲击(mm) 630 860 480 715 825 870 900 920
十字头速度 0.1, 0.5, 1 ~ 500 mm/min
(Possible to set by 1 mm/min pitch from 1 to 500 mm/min
十字头的准确性速度 High value either of ±0.5 % of the setting speed, or ±0.002 5 mm/min
设置方法速度 Manual : Numeric input from control panel 0.1, 0.5, 1~500 mm/min
(set by 1 mm/min pitch)
PC : Automatically set by test condition
手动速度 3 level speed (H/M/L), Each speed can be optionally set.
测试模式 Single or cycle mode (Combination of testing power and position)
Options : Creep, Automatic load
显示 Test force : 5 digit, The peak and the rupture testing power can be displayed.
Position : 0.00 ~ 1 999.99 mm (with minus sign)
标准函数
Load Cell Parts No. : Auto adjust
Load Cell span : Auto set for tension/compression.
Load Cell Zero point : One push
Position reset : One push
Operation detected sample rupture : Selectable from either stop, reverse or ignore
Rupture detectivity : Arbitrary set with 0.1 % ~ 9.9 % of the test force
Test condition registration : 10 conditions
Analog output of test force and position : DC0 V ~ DC±5 V (with scaling function)
Communication : Conforming to USB interface 2.0/1.1 standard, B type connector
选项
Chuck adapter : Chuck adapter for the lower side of chuck for tension test. TGE-CHB
Load Cell : Tension and compression type
with universal joint, connector pin and compression plate
----------
Tension type
with universal joint and connector pin
----------
Compression type
with compression plate
Test jig : Former goods can be mounted.
Displacement measuring function : Strain input type
Testor loading ruck : TGE-M01 (for sitting work),
TGE-M02 (for standing work)
Contact I/O : Use for TGE-I/O air chuck cover
Data processing software : Standard (Tension, Compression and Bending), Peel, Cycle (pulsating and both appearances)
轮廓尺寸(W x H x D) (mm)
 
1 400
x 2 450 x 894
1 221
x 2 192 x 720
900
x 1 522 x 490
660 x 1 619 x 503
重量 (Approx. kg) 1 200 900 200 80
电源电压 3-phase AC200 V±20 V Single phase AC100 V ~ 115 V
功耗 7.0 kVA 5.8 kVA 1.5 kVA 500 VA
操作临时./湿度范围
 
Temperature 5 ℃ ~ 40 ℃,
Humidity 20 % ~ 80 %RH (Non condensing)

Download
CAD files (DXF) Specification sheet (PDF) Instruction manual (PDF)
TGE-10kN (769KB)
TGE-5kN (769KB)
TGE-1kN (768KB)
TGE-500N (769KB)
TGE-200N (769KB)
 
TGE-10kN
No.TGE4103 (67KB)
---